Siemens ADVIA 2120 Скачать руководство пользователя страница 194

Страница: 194 / 477

Status Line messages

7-25

Autosampler - Input Shuttle Blocked

A rack in the input-shuttle position is preventing the autosampler from
completing a movement.

Corrective Action

Remove the rack from the shuttle position at the front of the input queue.

Select

Start

at the analyzer touchpad to restart autosampler operation.

Autosampler - Input Shuttle Not Empty

A rack in the input-shuttle position is preventing the autosampler from
completing a movement.

Corrective Action

Remove the rack from the shuttle position at the front of the input queue.

Select

Start

at the analyzer touchpad to restart autosampler operation.

Autosampler - Internal Communication Failure

During normal operation, the autosampler detected an internal, software-level
communication failure. This caused the autosampler to stop operation.

Corrective Action

At the analyzer touchpad, select

Off

Wait about 1 minute and select

to restart the analyzer.

If the problem persists, call Siemens Service for assistance.

Autosampler - Invalid Operation Mode, Reset Autosampler

The autosampler was unable to carry out a requested motion. The autosampler
might not be in the correct mode.

Corrective Action

At the analyzer touchpad, select

Off

Wait about 1 minute and select

to restart the analyzer.

If the problem persists, call Siemens Service for assistance.

Autosampler - Invalid Sequence Number

The autosampler sent the analyzer a sample ID sequence number that did not
match the expected sequence number.

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Результаты поиска

Содержание ADVIA 2120

Отзывы:

Siemens ADVIA 2120, Руководство оператора, Страница: 194 / 477

Результаты поиска

Содержание ADVIA 2120

Отзывы: