Siemens ADVIA 2120 Скачать руководство пользователя страница 186

Страница: 186 / 477

Status Line messages

7-17

Possible Cause

Car movement
problem.

Corrective Action

On the analyzer touchpad, select

Off

Wait about 1 minute and select

to restart the

analyzer.

If the problem persists, call Siemens Service for
assistance.

Persistent car
movement
problem
causing
binding and
excessive drag
on the racks.

CAUTION

Call Siemens Service for assistance. Only Siemens
Service personnel are authorized to take these corrective
actions.

Using the Autosampler

window of the

Exerciser

tab,

move the mixer to the Home position.

Manually move a rack from the input shuttle, through
the mixer, to the output shuttle. Check for binding
and excessive drag when moving the rack.

Perform the mixer alignment procedure as necessary.

Autosampler - Car Motion Denied

To prevent the collision of autosampler components, the system did not execute
the command to move the autosampler car.

Autosampler - Car Motion Denied, Reset Autosampler

The autosampler attempted an inappropriate car motion. An autosampler reset is
required.

Corrective Action

Select

Off

at the analyzer touchpad.

Wait about 1 minute and select

to restart the analyzer.

If the problem persists, call Siemens Service for assistance.

Autosampler - Car Motion Failed, Reset Autosampler

The autosampler car has failed to move properly. A reset is required.

Corrective Action

Open the autosampler access door.

Close the autosampler access door. The autosampler resets.

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Результаты поиска

Содержание ADVIA 2120

Отзывы:

Siemens ADVIA 2120, Руководство оператора, Страница: 186 / 477

Результаты поиска

Содержание ADVIA 2120

Отзывы: