manualshive.com logo in svg

Siemens ADVIA 2120, Руководство оператора, Страница: 448 / 477

Поделиться
Скачать
Siemens ADVIA 2120 Скачать руководство пользователя страница 448

 

10-42 

ADVIA Autoslide Slide Maker Stainer 

 

 

  

CAUTION

 

Do not put too much force on the staining wells, when removing them. 
Pulling up or out too hard may damage the wells. They should be clipped 
gently into and out of place on the stainer plate. 

Place the stainer wells in a tray with enough methanol to completely cover 
them. Agitate the tray to remove any air bubbles. 

4.

 

While the wells are soaking, use a soft cloth or paper towel to clean the 
stainer plate. Rotate the plate manually to clean the entire surface. 

 

5.

 

After the wells have soaked in the methanol for ten minutes, remove them 
from the tray and dry them with paper towels. 

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов