Siemens ADVIA 2120, Руководство оператора, Страница: 418 / 477

10-12 ADVIA Autoslide Slide Maker Stainer
5. Select
OK
.
6. When prompted to prime lines, select
Yes
. The system allows only one prime cycles;
select
OK
.
7. If bubbles remain in the reagent lines, prime the lines again using the Reagent
Inventory window.
Loading Slide Racks
•
Load at least two racks into the
rack loader. The rack loader can
hold up to 9 racks at a time.
•
Load the racks as shown below,
with the slide grooves facing
upwards.
•
You can load racks at any time.
Loading Slides
When the autoslide startup cycle runs, the slide dispenser must contain slides and there
must be racks in the rack loader.
WARNING
Do not try to empty the slide dispenser. Finger injuries and sensor damage can occur if
you attempt to remove slides from the slide dispenser.
Microscope slides - storage and handling
When storing and handling microscope slides, follow these precautions:
•
Microscope slides and cover glasses should be rotated when stored.
•
To prevent moisture contamination, store the slides off the floor.
•
To minimize temperature and humidity changes, keep slides as far away as
possible from doors and heating or air conditioning ducts.
•
Remember, slides do not have to be old to be affected by moisture.
Slides should be allowed to come to Lab temperature, before they are opened.