Siemens ADVIA 2120 Скачать руководство пользователя страница 176

Страница: 176 / 477

Status Line messages

7-7

Corrective Action

Define at least one QC file in the Control Dictionary window.

A Defined File in Prg.par Is Not Found for Backup

A file is missing that has been defined in the list of programs to be saved when
running the Program backup through the End of Day functions.

Corrective Action

Call Siemens Service for assistance.

Analyzer Connected

The computer has connected with the analyzer.

Analyzer Not Connected

The computer has not connected with the analyzer.

Possible Cause

The analyzer is
not on.

Corrective Action

Select

at the analyzer touchpad.

Faulty or
disconnected
Ethernet cable
(from the
analyzer - J2
Workstation
connection to
the computer).

Verify that the Ethernet cable connection is secure.
Replace if necessary.

Faulty analyzer
CPU board or
network
interface PC
board.

Call Siemens Service for assistance.

Analyzer Not Ready

The analyzer cannot start sample aspiration or hydraulic cycles.

Possible Cause

The SHEATH/

Corrective Action

Replace the SHEATH/RINSE reagent.

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Результаты поиска

Содержание ADVIA 2120

Отзывы:

Siemens ADVIA 2120, Руководство оператора, Страница: 176 / 477

Результаты поиска

Содержание ADVIA 2120

Отзывы: