Siemens ADVIA 2120 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 477

Siemens ADVIA 2120 Скачать руководство пользователя страница 60

4-14

Maintaining the Analyzer

2.

Remove the centering collar from the Autosampler or the Manual closed-
tube sampler. (See page 4-5 for instructions.)

3.

Turn the needle cover counterclockwise

to loosen the needle.

4.

Discard the needle along with its cover as biohazardous material.

5.

Before installing the replacement needle, clean the needle base using a cotton
swab soaked in water, then wipe with another cotton swab soaked in water.

NOTE

If there is extensive buildup, use a solution of 25% household bleach and
water to remove residual dried blood.

6.

Install the replacement needle.

a.

Remove the clear plastic end of the needle cover (

1

).

b.

With the red needle cover in place, screw the needle
clockwise

into the needle base. Be careful not to

cross-thread the needle.

1

CAUTION

Do not use any other tools to secure the needle. Overtightening can affect
needle performance.

c.

Remove the red cover from the needle and save it for use during the next
needle installation.

7. Reconnect all the tubes, except the sample line on the autosampler, to the

centering collar

Analyser Autoslide centering
centering collar collar

V43

V44

V45

MCTS

V46

NOTE

The dual Autosampler has two centering collars, one for analyzer sampling
and one for optional Autoslide sampling. Both Centering collars use the same
sampling needles.

8. Carefully replace the collar over the needle. On the autosampler centering

collar, be sure to turn the spring-loaded knob back to its original position.

9.

On the autosampler, reposition the autosampler aspirator assembly. Make
sure that it drops firmly in place over the guide pins, then reconnect the
sample line to the base of the centering collar.

«
...
58
59
60
61
62
...
»

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов