manualshive.com logo in svg

Siemens ADVIA 2120, Руководство оператора, Страница: 78 / 477

Поделиться
Скачать
Siemens ADVIA 2120 Скачать руководство пользователя страница 78

Troubleshooting the Analyzer 

5-11 

 

To wash the RBC/baso/retic flowcell, use a 25% solution of household bleach 
and water. 

To wash both flowcells at the same time, use EZ KLEEN. 

1.

 

Select 

Flowcell Wash

 to select it. 

2.

 

Select the flowcell you want to wash by clicking an option in the Flowcell 
Options area. 

•

 

Perox Flowcell 

•

 

RBC/Baso/Retic Flowcell 

•

 

Both 

3.

 

Hold a tube of EZ KLEEN (perox flowcell) or bleach (RBC/baso/retic 
flowcell) under the open-tube sampler probe. 

IMPORTANT 

Do not push the aspirate plate. 

4.

 

Select 

Start

 to begin the flowcell wash. Continue to hold the tube under the 

probe until you hear a beep and the wash block starts to move down 
(approximately 100 seconds). 

You can select Cancel to stop the flowcell wash. It will stop at the end of the 
current cycle.  

Cleaning the Flowcells on the Analyzer  

This method of cleaning the flowcells bypasses the shear valve and the UFC 
pathways. 

•

 

Materials required 

•

 

Beaker 

•

 

Household bleach 

Time: 10 minutes 

Analyzer mode: Ready to Run 

  

BIOHAZARD

 

All products or objects that come in contact with human or animal body fluids 
should be handled, before and after cleaning, as if capable of transmitting 
infectious diseases. Wear facial protection, gloves, and protective clothing. 

The operator should follow the recommendations to prevent the transmission of 
infectious agents in health-care settings as recommended for potentially 
infectious specimens in 

Protection of Laboratory Workers from Infectious 

Disease Transmitted by Blood, Body Fluids, and Tissue

, 2nd edition; Approved 

Guideline (1997) Document M29-A, National Committee for Clinical Laboratory 
Standards (NCCLS). This document contains complete information on user 
protection and it can be used as reference material for instructions on laboratory 
safety. 

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов