Siemens ADVIA 2120 Скачать руководство пользователя страница 425

Страница: 425 / 477

ADVIA Autoslide Slide Maker Stainer

10-19

8. Loosen the 2 screws where the slots are on the Autoslide cart bracket so you

can move the support structure.

Figure 5. Autoslide cart bracket with loosened screws

9. Move the support structure forward up to 0.3 m (1 ft), ensuring that the

electrical cables are not stretched to far.

Blood sample line

Pressure line

Ground strap

Vacuum line

Figure 6. Moved Support Structure

NOTE:

The ground strap and interface cable remain connected to the Autoslide.

Disconnecting the sample blood line, pressure line, and vacuum lines allows you
to move the Autoslide approximately 0.3 m (1 ft).

10.

To reconnect the Autoslide, move the Autoslide module back into position.

11.

Tighten the clamp screws.

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Результаты поиска

Содержание ADVIA 2120

Отзывы:

Siemens ADVIA 2120, Руководство оператора, Страница: 425 / 477

Результаты поиска

Содержание ADVIA 2120

Отзывы: