manualshive.com logo in svg

Siemens ADVIA 2120, Руководство оператора, Страница: 419 / 477

Поделиться
Скачать
Siemens ADVIA 2120 Скачать руководство пользователя страница 419

 

ADVIA Autoslide Slide Maker Stainer 

10-13 

 

 

•

 

Use slides provided by Siemens 
approved vendors 

only

. 

Size: 

76 x 26 x 1mm 

Description:

 ground edges, 

rounded corners, super frost 

•

 

Avoid touching slide surfaces with 
your fingers. 

•

 

Control-painted areas of the slides 
are all facing up. 

•

 

Make sure slides are not stuck together before loading. 

•

 

Make sure to load the slides in the correct orientation. The painted area must 
be on the top of the slides and on the left-hand side of the stack. 

•

 

Insert a stack of slides as shown above. The stack of slides must reach the 
stack level detectors. The slide dispenser can hold up to 160 slides.

 

Emptying the Stain Waste Container 

The stain waste is collected in a container located behind the system. Empty the container 
periodically or whenever the system indicates that the container is full. 

Stain waste must be collected using the tube and container specified by local regulation. 
Stain waste contains methanol. Methanol is a solvent that may destroy an inappropriate 
connection and cause leaks that are dangerous for the user and damaging to the 
instrument. 

Dispose of waste according to local regulatory requirements. 

  

WARNING

 

Make sure that the Autoslide module is 

not

 processing slides while you disconnect the 

stain waste container 

IMPORTANT 

Local laws and regulations protect the environment and encourage resource conservation 
by regulating the disposal of hazardous wastes. Because some of the wastes generated by 
the analyzer may be classified as hazardous waste, you must be familiar with the 
applicable hazardous waste handling and disposal laws and regulations in your area.  

Running the Daily Startup Manually 

Your system can be set to run the startup procedure at a preset time. However, if the 
system is not set to do so, or if you are starting it at a different time, perform the 
following steps. 

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Отзывы:

Нет отзывов