Siemens ADVIA 2120 Скачать руководство пользователя страница 196

Страница: 196 / 477

Status Line messages

7-27

Persistent car
movement
problem
causing
binding and
excessive drag
on the racks.

CAUTION

Call Siemens Service for assistance. Only Siemens
Service personnel are authorized to take these corrective
actions.

Perform the mixer alignment procedure as necessary.

Check pushpin and centering collar operation when
the mixer is in the aspirate position.

Check for signs of excessive friction in the mixer
bearings.

Autosampler - Mixer Motion Denied, Reset Autosampler

The autosampler attempted to perform an inappropriate mixer motion. An
autosampler reset is required.

Corrective Action

Select

Off

at the analyzer touchpad.

Wait about 1 minute and select

to restart the analyzer.

If the problem persists, call Siemens Service for assistance.

Autosampler - Mixer Motion Failed, Reset Autosampler

The autosampler failed to perform a routine mixer motion during normal rack
processing. A reset is required.

Possible Cause

Critical
autosampler
error.

Corrective Action

At the analyzer touchpad, select

Off

Wait about 1 minute and select

to restart the

analyzer.

If the problem persists, call Siemens Service for
assistance.

Mixer is
blocked by a
foreign object.

Open the autosampler access door.

Remove any foreign objects that might block mixer

motion.

Close the autosampler access door. The

autosampler will reset.

Mixer home
sensor is faulty.

Call Siemens Service for assistance.

Mixer motor
power cable is
not properly

Call Siemens Service for assistance.

Содержание ADVIA 2120






























































































































































































































































































































































































































































































Результаты поиска

Содержание ADVIA 2120

Отзывы:

Siemens ADVIA 2120, Руководство оператора, Страница: 196 / 477

Результаты поиска

Содержание ADVIA 2120

Отзывы: