manualshive.com logo in svg

Panasonic S-3650PF3E, Технические данные и руководство по обслуживанию

Panasonic S-3650PF3E - Мощный и надежный продукт с выдающимися характеристиками. Теперь вы можете с легкостью узнать больше о его технических данных и обслуживании, скачав бесплатный руководство по эксплуатации с manualshive.com. Не упустите шанс загрузить его и улучшить свой пользовательский опыт.

Поделиться
Скачать
background image

1-7-1

1

1

1

1

Flow of External Static Pressure

No

No

No

Start external static pressure setting 

Yes

Yes

Yes

Line A (set at shipment)

on the PQ diagram was designed

and installed. 

Set static pressure setting 

to manual setting mode.

Wired remote controller 

available

b. Manual setting

(set with the indoor unit control 

PCB) Change the dip switch.

See “How to Set on Indoor Unit 

Control PCB” on page 1-7-2.

a.No setting modification

c. Manual setting

Item code “b0” : 0~10 setting(*Note (3)) (*Note (4)) 

See “Operating the High-spec Wired 

Remote Controller” or “Operating the Timer 

Remote Controller”on page 1-7-3 and 1-7-5.

d. Auto airflow volume setting

Item code “b0” : -2 setting (*Note (4))

See “Operating the High-spec Wired 

Remote Controller” or “Operating the Timer 

Remote Controller”on page 1-7-3 and 1-7-5.

Auto airflow volume control

operations 

(*Note (5))

See “Operating the High-spec Wired 

Remote Controller” or “Operating the Timer 

Remote Controller”on page 1-7-3 and 1-7-5.

External static pressure setting completed

Test operation display will disappear. (*Note (6))

Operation checks for external static pressure settings

 (*Note (2))

See “Operating the High-spec Wired Remote Controller” or “Operating the Timer Remote Controller”on page 1-7-3 and 1-7-5.

Check if the setting is within the range of use on the PQ diagram.

If out of range, adjust until it becomes within the range of use.

In the case of identical setup, it is possible to omit this operation check if judged unnecessary.

NOTE

a.

(1) Check the following items before performing the setting-check operations or auto airflow volume operations.

1) Check to make sure that the electrical wiring and ducting have been completed. Activate the stand-by mode. In particular, make

sure that the closed damper located in the middle of the duct is open, if installed. Also, make sure that air filters have been

installed inside the air inlet duct.

Check to make sure air is not leaking from the joints.

2) If multiple air outlets and air inlets are included, adjust the airflow volume ratio of all of them until they meet the design airflow ratio.
3) Make sure the address setting has been completed.

(2) The operation check will be completed in approximately three minutes if the settings have been made correctly. The settings will be

modified if they are out of the range of use (maximum 30 minutes.). If this is not completed within 31 minutes, check whether the air

speed is set to “H” or not.

b.

from the shipment setting when reset after once setting the external 

static pressure.)

1-7.  Indoor Fan Performance (Type F3)

EXTERNAL STATIC PRESSURE SETTING

For middle static pressure duct type indoor units, the ventilating resistance so-called “external static pressure” becomes greatly different 

depending on the connected duct length, shape, number of air outlet ports and types of filters.

When installing this unit, be sure to carry out the external static pressure setting in order to operate in the rated airflow volume.

Choose one of the following methods from “a”, “b”, “c” or “d” as shown in the flow chart (within the dotted lines) and then make the 

setting accordingly.

  No setting modification............................................................ :   Use-as-is at shipment (there are cases in which the setting may differ 

connector.

c.

  Manual setting (set with the indoor unit control PCB) ............. :   For high static pressure. Switching method with the short-circuit 

d.

Manual setting (set with the wired remote controller) ............. :   Low static pressure ~ high static pressure

with the auto airflow control drive.

  Auto airflow volume setting (set on the wired remote controller) .... :   Air outlet volume is automatically adjusted to the rated airflow volume 

Finish the ducting and electrical wiring and prepare it for use. (Note (1))
External static pressure should be set during initial operations after installation (before 

the cooling and heating test run).

When operating with group control (connecting multiple indoor units with one wired 

remote controller), make the middle static pressure duct type to the main unit.

SM830283-00_欧州向け R32シングル36-71形TD&SM.indb   1

20/01/30   10:24:48

Содержание S-3650PF3E


































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-3650PF3E

Zephyr XL Owner'S Manual preview
XL
Бренд: Zephyr Страницы: 6
Daikin VRV FXZQ07MVJU9 Installation Manual preview
VRV FXZQ07MVJU9
Бренд: Daikin Страницы: 27
Daikin VRV III BSVQ100P8V1B Manual preview
VRV III BSVQ100P8V1B
Бренд: Daikin Страницы: 20
Daikin FTYNV20AV1 Owner'S Manual preview
FTYNV20AV1
Бренд: Daikin Страницы: 40
TCL 10T3E1 Let'S Get Started preview
10T3E1
Бренд: TCL Страницы: 33
Ohyama woozoo AP45-M User Manual preview
woozoo AP45-M
Бренд: Ohyama Страницы: 72
Camfil CleanSeal V3 Installation & Operating Manual preview
CleanSeal V3
Бренд: Camfil Страницы: 63
Rowenta PU4020F0 Manual preview
PU4020F0
Бренд: Rowenta Страницы: 44
Airpura I-600 User Manual preview
I-600
Бренд: Airpura Страницы: 16
Sinclair ROCKY SERIES ASH-09AIR Manual preview
ROCKY SERIES ASH-09AIR
Бренд: Sinclair Страницы: 27
INDUSTRIAL MAID AZTech T3500 Owner'S Manual preview
AZTech T3500
Бренд: INDUSTRIAL MAID Страницы: 20
Avanti PAC12000 Instruction Manual preview
PAC12000
Бренд: Avanti Страницы: 29
IQAir GCX AM User Manual preview
GCX AM
Бренд: IQAir Страницы: 12
Rapid 7500 136 Installation, Operation & Service Manual preview
7500 136
Бренд: Rapid Страницы: 156
SANG TAC-12CHSA/JAI Service Manual preview
TAC-12CHSA/JAI
Бренд: SANG Страницы: 42
GE APCA14YBMW Owner'S Manual And Installation Instructions preview
APCA14YBMW
Бренд: GE Страницы: 48
GE APFA10 Owner'S Manual And Installation Instructions preview
APFA10
Бренд: GE Страницы: 48
Daikin FDXS25E7VMB Operation Manual preview
FDXS25E7VMB
Бренд: Daikin Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды