manualshive.com logo in svg

Panasonic S-3650PF3E, Технические данные и руководство по обслуживанию

Panasonic S-3650PF3E - Мощный и надежный продукт с выдающимися характеристиками. Теперь вы можете с легкостью узнать больше о его технических данных и обслуживании, скачав бесплатный руководство по эксплуатации с manualshive.com. Не упустите шанс загрузить его и улучшить свой пользовательский опыт.

Поделиться
Скачать
background image

1

1-11-2-1-11

1.  Install the unit once you have checked that the installation location matches the following conditions.

  A location with suf

fi

 cient ventilation.

  Possibly a location that is sheltered from rain or direct sunlight and is well-ventilated so that hot and cool air does not build up.

  A location where the area around the discharge is not exposed to animals or plants which could adversely affect the release of hot or cool air from the unit.

  A location where the discharge and operation noise will not be a nuisance to the neighbours.

  A location that can support the product’s weight or vibrations and secured for horizontal installation wherever possible.

  A location that does not obstruct the air discharge or intake.

  A location where there is no danger of 

fl

 ammable or corrosive gas leaks.

  A location that provides space for installation and service.

  A location that allows the pipe and cable length 

fi

 xture for internal and external connections.

  It may need two or more people to carry out the installation work.

2.  Refer to the diagram below for the installation location which is exposed to strong wind.

  If a strong wind of more than 5 m/sec blows to the area directly in front of the discharge, the outdoor unit’s air 

fl

 ow is reduced and the out

fl

 ow may re-enter (short circuit) causing 

the following outcome:

  “Reduced capacity”, “Increased frost formation during heating” or “Operation stopped due to increased pressure”.

  Should an exceptionally strong wind blow to the area directly in front of the discharge of the outdoor unit; there is the risk of damage due to the fan’s high-speed reverse rotation. 

  If the direction of the prevailing wind is known when operating the unit, place the unit at an appropriate angle to the wind’s direction so that the discharge faces towards a building 

or a wall.

Please install according to 

｢

Warning

｣｢

Caution

｣ 

on page1-11-2-1-1 to 1-11-2-1-6.

1. SELECT THE OUTDOOR UNIT INSTALLATION LOCATION

 

Warning

Be careful when picking up and moving the indoor and outdoor units. Get a partner to help, and bend your knees when lifting to reduce strain on your back. 

Sharp edges or thin aluminum 

fi

 ns on the air conditioner can cut your 

fi

 ngers.

3.  If installing at locations prone to snowfall, install the unit as high as possible with suitable roo

fi

 ng which shelters the unit from snow.

4.  Avoid installing the unit in locations where there are petroleum products (such as machine oil), saline content (such as coastal areas), sulphurous gas and where 

high frequency noise is generated.

5.  Place the indoor and outdoor unit, power cords and connection cable between outdoor and indoor unit at a minimum distance of 1 meter or more 

away from televisions and radios. This is to avoid interference to picture and/or sound.

 

(However, depending on the electromagnetic waves, noise interference may still occur even with the 1 meter separation.)

6.  For restaurants and kitchens, avoid installing at locations which draws oil and steam.

 

Plastic parts can deteriorate from droplets of oil and steam or it can cause falling parts or water leakage.

7.  Avoid installing at the location where cutting oil mist or iron powder is present.

8.  If there is an immense voltage 

fl

 uctuation due to the location’s problem, ensure to split the power supply.

9.  When installing the product in a place where it will be affected by typhoon or strong wind such as wind blowing between buildings, including the 

rooftop of a building and a place where there is no building in surroundings, 

fi

 x the product with an overturn prevention wire, etc.

10.  Ensure to assign several people or use a mechanical lift, etc. to transport the unit.

Air Intake

Strong wind

Strong wind

Air discharge

Wall / outer wall

Air intake side

Keep space for installation 

and maintenance service

SM830283-00_欧州向け R32シングル36-71形TD&SM.indb   11

20/01/30   10:26:00

Содержание S-3650PF3E


































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для S-3650PF3E

TCF T Series Instruction, Operation And Maintenance Manual preview
T Series
Бренд: TCF Страницы: 19
Haier T-Series Service Manual preview
T-Series
Бренд: Haier Страницы: 56
Vaillant VAI 6-025 WN User Manual preview
VAI 6-025 WN
Бренд: Vaillant Страницы: 136
Siga CSF_HW_TUBE_R_R Installation Manual preview
CSF_HW_TUBE_R_R
Бренд: Siga Страницы: 14
Daikin Split Sensira R32 Service Manual preview
Split Sensira R32
Бренд: Daikin Страницы: 208
GE APEW50 Owner'S Manual preview
APEW50
Бренд: GE Страницы: 2
IQAir Cleanroom H 13 User Manual preview
Cleanroom H 13
Бренд: IQAir Страницы: 28
Vaporetto ECO PRO 3000 Manual preview
ECO PRO 3000
Бренд: Vaporetto Страницы: 14
Kaisai KFS-48HRG32X Owners & Installation Manual preview
KFS-48HRG32X
Бренд: Kaisai Страницы: 56
Daikin FTKS09JV2S Service Manual preview
FTKS09JV2S
Бренд: Daikin Страницы: 22
Tadiran Telecom TGL-9 Installation Instructions preview
TGL-9
Бренд: Tadiran Telecom Страницы: 4
York CSA 48 Technical Manual preview
CSA 48
Бренд: York Страницы: 32
Daikin RXJ42A2V1B Installation Manual preview
RXJ42A2V1B
Бренд: Daikin Страницы: 16
Gree G1407R Operating Instructions Manual preview
G1407R
Бренд: Gree Страницы: 24
Omega Altise OAPC41W Operation, Maintenance And Safety Instructions preview
OAPC41W
Бренд: Omega Altise Страницы: 24
AireSpa ASWRB100 Use & Care Manual preview
ASWRB100
Бренд: AireSpa Страницы: 20
Daikin VRV FXMQ20PAVE2 Operation Manual preview
VRV FXMQ20PAVE2
Бренд: Daikin Страницы: 16
Daikin FXDQ20A2VEB Installation Manual preview
FXDQ20A2VEB
Бренд: Daikin Страницы: 18

Бренды по названию

Популярные бренды

Загрузить еще бренды