Rapid 7500 136 Скачать руководство пользователя

Страница: 1 / 156

NOT FOR RESIDENTIAL USE

WARNING

Installation must be done by a registered installer/

contractor qualified in the installation and service of

gas/oil-fired heating equipment or your fuel supplier.

Improper installation, adjustment, alteration, service

or maintenance can result in death, injury or property

damage. Read the installation, operation and service

manual thoroughly before installing or servicing

this equipment.

Installer

Please take the time to read and understand

these instructions prior to any installation.

Installer must give a copy of this manual to the owner.

Owner

Keep this manual in a safe place in order to provide

your service technician with necessary information.

WARNING

FOR YOUR SAFETY

If you smell gas:

1.  Open windows.
  2.  DO NOT try to light any appliance.
  3.  DO NOT use electrical switches.
  4.  DO NOT use any telephone in
   your building.
  5.  Extinguish any open flame.
  6.  Leave the building.
  7.  Immediately call your local fuel

supplier after leaving the building.

Follow the fuel supplier’s

   instructions.
  8.  If you cannot reach your fuel

supplier, call the Fire Department.

Fire Hazard

Keep all flammable objects, liquids and
vapors the minimum required clear-
ances to combustibles away from
equipment.

Some objects will catch fire or explode
when placed close to equipment.

Failure to follow these instructions can
result in death, injury or property
damage.

Rapid Engineering LLC

1100 Seven Mile Road NW
Comstock Park, MI 49321
Telephone: +1.616.784.0500
Fax: +1.616.784.1910
Toll Free: 800.536.3461

www.rapidengineering.com

Rapid

7500-Series

Indirect, Gas/Oil-Fired,

Industrial Air Turnover Unit

Installation, Operation &

Service Manual

7500 136
7500 148
7500 154
7500 236
7500 242
7500 248
7500 254
7500 260
7500 272

P/N RP141100NA Orig 12/13

Содержание 7500 136





























































































































































Результаты поиска

Содержание 7500 136

Отзывы:

Похожие инструкции для 7500 136

Бренды по названию

Популярные бренды

Rapid 7500 136, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание 7500 136

Отзывы:

Похожие инструкции для 7500 136

Бренды по названию

Популярные бренды