manualshive.com logo in svg

Infineon TLE984 QX Series, Руководство пользователя

Infineon TLE984 QX Series - автомобильный контроллер двигателя. Подробное описание и инструкция по использованию можно скачать бесплатно в формате PDF на нашем сайте. Удобное и понятное руководство пользователя поможет вам успешно использовать этот продукт. Скачайте его с manualshive.com.

Поделиться
Скачать
background image

User Manual

530

Rev. 1.1 

 2019-03-18

TLE984xQX

Microcontroller with LIN and Power Switches for Automotive Applications

Capture/Compare Unit 6 (CCU6)

18.3.4.3 Output Modulation and Level Selection

The last block of the data path is the Output Modulation block. Here, all the modulation sources and the trap
functionality are combined and control the actual level of the output pins (controlled by the modulation
enable bits T1xMODENy and MCMEN in register MODCTR). The following signal sources can be combined here

for each T12 output signal

 (see 

Figure 136

 for compare channel CC60):

• A 

T12 related compare signal

 CC6x_O (for outputs CC6x) or COUT6x_O (for outputs COUT6x) delivered by 

the T12 block (state selection with dead-time) with an individual enable bit T12MODENy per output signal 
(y = 0, 2, 4 for outputs CC6x and y = 1, 3, 5 for outputs COUT6x)

• The 

T13 related compare signal

 CC63_O delivered by the T13 state selection with an individual enable bit 

T13MODENy per output signal (y = 0, 2, 4 for outputs CC6x and y = 1, 3, 5 for outputs COUT6x)

• A 

multi-channel output signal

 MCMPy (y = 0, 2, 4 for outputs CC6x and y = 1, 3, 5 for outputs COUT6x) with 

a common enable bit MCMEN

• The 

trap state

 TRPS with an individual enable bit TRPENy per output signal (y = 0, 2, 4 for outputs CC6x and 

y = 1, 3, 5 for outputs COUT6x)

If one of the modulation input signals CC6x_O/COUT6x_O, CC63_O, or MCMPy of an output modulation block
is enabled and is at passive state, the modulated is also in passive state, regardless of the state of the other
signals that are enabled. Only if all enabled signals are in active state the modulated output shows an active
state. If no modulation input is enabled, the output is in passive state.
If the Trap State is active (TRPS = 1), then the outputs that are enabled for the trap signal (by TRPENy = 1) are
set to the passive state.
The output of each of the modulation control blocks is connected to a level select block that is configured by
register PSLR. It offers the option to determine the actual output level of a pin, depending on the state of the
output line (decoupling of active/passive state and output polarity) as specified by the Passive State Select bit
PSLy. If the modulated output signal is in the passive state, the level specified directly by PSLy is output. If it
is in the active state, the inverted level of PSLy is output. This allows the user to adapt the polarity of an active
output signal to the connected circuitry.
The PSLy bits have shadow registers to allow for updates without undesired pulses on the output lines. The
bits related to CC6x and COUT6x (x = 0, 1, 2) are updated with the T12 shadow transfer signal (T12_ST). A read
action returns the actually used values, whereas a write action targets the shadow bits. Providing a shadow
register for the PSL value as well as for other values related to the generation of the PWM signal facilitates a
concurrent update by software for all relevant parameters.

Figure 136

 shows the output modulation structure for compare channel CC60 (output signals CC60 and

COUT60). A similar structure is implemented for the other two compare channels CC61 and CC62.

Содержание TLE984 QX Series













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TLE984 QX Series

GE 400 Series Installation Instructions preview
400 Series
Бренд: GE Страницы: 2
Y-Solar Smart-MPPT Li Series User Manual preview
Smart-MPPT Li Series
Бренд: Y-Solar Страницы: 6
Hardi HC5500 Quick Manual preview
HC5500
Бренд: Hardi Страницы: 2
YASKAWA CC-Link Technical Manual preview
CC-Link
Бренд: YASKAWA Страницы: 64
S-COM 7K Manual preview
7K
Бренд: S-COM Страницы: 400
Danfoss VLT AutomationDrive FC 302 Installation Manual preview
VLT AutomationDrive FC 302
Бренд: Danfoss Страницы: 128
eclisse E-MOTION Installation, Operation And Maintenance Manual preview
E-MOTION
Бренд: eclisse Страницы: 40
Zener SMARTSTART 6000 Networking Manual preview
SMARTSTART 6000
Бренд: Zener Страницы: 36
Zapi SMART CONSOLE Instructions preview
SMART CONSOLE
Бренд: Zapi Страницы: 5
Lampert PIP 100 Operating Instructions Manual preview
PIP 100
Бренд: Lampert Страницы: 15
Sunricher SR-ZG9001T-RGBW Manual preview
SR-ZG9001T-RGBW
Бренд: Sunricher Страницы: 3
Curtis 1232E Manual preview
1232E
Бренд: Curtis Страницы: 30
Progeny Crystal.PoE V4 Manual preview
Crystal.PoE V4
Бренд: Progeny Страницы: 4
Omega Engineering PHCN-410 Operator'S Manual preview
PHCN-410
Бренд: Omega Engineering Страницы: 11
SAMES KREMLIN LP 6 - 0.5/4 Translation From The Original Manual preview
LP 6 - 0.5/4
Бренд: SAMES KREMLIN Страницы: 5
NEC V850E/RS1 User Manual preview
V850E/RS1
Бренд: NEC Страницы: 852
Doepke RJSG 1 Installation And Operating Manual preview
RJSG 1
Бренд: Doepke Страницы: 2
Vega VEGATOR 111 Operating Instructions Manual preview
VEGATOR 111
Бренд: Vega Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды