Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 81 / 616

– "X1C"
The logic state of the relevant input or output is displayed for the individual interface pins, e. g. to
check the external circuit or wiring.
The statuses are displayed in different colours. The following statuses are possible:
Status Representation
Active symbol (logic 1)
Inactive signal (logic 0)
Unavailable signal
Tab. 47 Description of possible statuses
2.4.4 Error log
Additional information about the error memory è 9.4.4 Error memory.
The "Error log" diagnostics panel can only be operated if the following prerequisite is met:
–
The plug-in is connected to a device.
A table of all the diagnostic messages currently on the device is available in the working area.
The table is split into the following columns:
–
Index
– "State"
– "Category"
– "ID"
– "Name"
– "Timestamp"
– Adorner
Information on dividing the error messages into the main group, sub-group and by number
è 9.4.2 Structure of messages.
Symbol Command Description
Update readout of the diagnostic memory
Export to CSV... Exporting diagnostic data as a .csv file
Tab. 48 Description of the symbols in the title bar of the working area
Reading out the diagnostic memory
The diagnostic memory can be read out with the "Update" command.
The diagnostic memory is automatically read out in the following cases:
–
The content page is opened.
– The content page is opened, and the plug-in establishes a connection to the device.
CMMT-ST Plug-in
81 Festo — CMMT-ST-SW — 2019-02