Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 151 / 616

ID Px. Parameters Description
7166 Current switch-off
delay holding brake Unit s
Switch-on delay saved in the EEPROM for the execution of a
command if an electronic data sheet for the Festo motor is
stored.
Access read/−
Update reinitialization
7161 Switch-on delay hold-
ing brake
Unit s
The delay saved in the EEPROM for the deactivation of the regu-
lator if an electronic data sheet for the Festo motor is stored.
Access read/−
Update reinitialization
7164 Switch-off delay hold-
ing brake
Unit s
Activation of the current reduction for the holding brake
Access read/write
Update effective immediately
40001 Activation current
reduction holding
brake
Unit −
Specifies the time with which the current reduction for the hold-
ing brake is initiated.
Access read/write
Update effective immediately
40002 Delay time
Unit s
Specifies the voltage supplied to the holding brake before cur-
rent reduction is initiated. The voltage is only output if the cur-
rent reduction for the holding brake is activated (Px.4001.0.0)
Access read/write
Update effective immediately
40003 Supply voltage hold-
ing brake
Unit V
Specifies the voltage to which it is reduced after elapse of the
delay time.
Access read/write
Update effective immediately
40004 Holding voltage
Unit V
Tab. 118 Parameters
Product configuration
151 Festo — CMMT-ST-SW — 2019-02