Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 16 / 616

2.1.2.3 Toolbar
Overview
The toolbar contains commands frequently required for the currently displayed context.
Some commands are the same in all contexts. Additional commands are provided for the currently
selected context:
–
Parameterisation è Toolbar
– Diagnosis è Toolbar
– Control
è
Toolbar
The following commands are available in every context:
Fig. 2 Toolbar area
No. Section/command Description
1
Connection control
Functions:
–
Connect plug-in to a device
– Display current connection and device status
– Manage plug-in communication settings
Additional information
è
2.2.2.1 Connection control.
Function:
–
Assign master control to the plug-in or higher-level
controller
The scroll bar shows the current setting.
"Control"
The command can be executed if the following pre-
requisite is met:
–
The plug-in is connected to a device.
– No other plug-in has the master control.
2
If another plug-in has the master control, an information
symbol is displayed over the deactivated command
"Control".
The tool tip for the command "Control" contains the IP
address and the port number of the device.
3
"Powerstage"
Function:
–
Release final stage of the servo drive
The scroll bar shows the current setting.
CMMT-ST Plug-in
16 Festo — CMMT-ST-SW — 2019-02