Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 496 / 616

ID Dx. Message Description
Default: save (1) 18 | 00 | 00092
(301989980) Motor change detec-
ted, commutation
angle invalid Error
memory
Can be parameterised: No
Motor change detected, zero point offset invalid
Remedy – Carry out homing again and save
Default: Stop category 0 (4096) Classifica-
tion
Can be parameterised: No
Default: save (1)
18 | 00 | 00093
(301989981) Motor change detec-
ted, zero point offset
invalid
Error
memory
Can be parameterised: No
Commutation angle in encoder invalid
Remedy – Run commutation-angle detection
Default: Stop category 0 (4096) Classifica-
tion
Can be parameterised: No
Default: save (1)
18 | 00 | 00094
(301989982) Commutation angle in
encoder invalid
Error
memory
Can be parameterised: No
Encoder type plate invalid
Remedy – Service required
Default: Stop category 0 (4096) Classifica-
tion
Can be parameterised: No
Default: save (1)
18 | 00 | 00095
(301989983) Encoder type plate
invalid
Error
memory
Can be parameterised: No
Encoder type plate (user-defined) invalid
Remedy – Complete new configuration using the
commissioning tool
Default: Stop category 0 (4096) Classifica-
tion
Can be parameterised: No
Default: save (1)
18 | 00 | 00096
(301989984) Encoder type plate
(user-defined) invalid
Error
memory
Can be parameterised: No
Encoder identification reports incorrect encoder type
Remedy – Check configuration
Default: Stop category 0 (4096)
18 | 00 | 00227
(301990115) Encoder identification
reports incorrect
encoder type
Classifica-
tion
Can be parameterised: No
Diagnostics and fault clearance
496 Festo — CMMT-ST-SW — 2019-02