Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 122 / 616

Reference point Calculation rule
Negative software end
position SLN = AZ + c = REF + a + c
Positive software end
position SLP = AZ + d = REF + a + d
Target position/actual
position TP/AP = AZ + b
Tab. 98 Rotational measuring reference system – calculation rule
The various positions are specified according to the configured user unit. At the conversion of the user
unit, the variables are converted automatically.
Linear measuring reference system
Example: linear drive
REF Homing point (reference point)
AZ Axis zero point
SLN Negative software end position (software limit negative)
SLP Positive software end position (software limit positive)
TP Target position
AP Actual position/current position (actual position)
a Axis zero point offset (AZ)
b Target/actual position (TP/AP)
c Negative software end position (SLN)
d Positive software end position (SLP)
1 Usable range (usable stroke)
Product configuration
122 Festo — CMMT-ST-SW — 2019-02