Type
Display in a parameter list
For the current setting of non-relevant
parameters
Simple entry, grey
Tab. 30 Display of the values on a parameter panel
Changing values
The modified value is applied as follows:
–
After leaving the input field.
–
After the [Enter] key on the keyboard has been pressed.
If device parameter values are changed during the existing connection, these are transferred to the
device
è
2.1.6 Automatic data synchronisation.
The modified value is only applied if the entered value is valid.
Displaying errors in the navigator
Fig. 15 Displaying errors in the navigator
If parameters on a parameter panel contain errors, the number of errors is displayed in the navigator.
The total number is displayed in the "Parameterisation" context. If the same error occurs on several
parameter panels, it is only counted once in the total number.
2.3.2
Entering parameters
Operability of the parameter panels
Parameter panels can only be edited if the drive configuration is complete. This does not apply to the
drive configuration itself and the parameter list.
The parameter panels are then displayed in read mode. Control elements are deactivated.
CMMT-ST Plug-in
49
Festo — CMMT-ST-SW — 2019-02
Содержание CMMT-ST-SW
Страница 615: ......
