Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 504 / 616

ID Px. Parameters Description
Bit mask for data trigger AND link
Access read/write
Update effective immediately
60013 Bit mask data trigger
Unit −
Tab. 434 Parameters
Data trigger example
The recording should be started when the value of the following parameter exceeds 0.5 user units:
–
Setpoint value speed controller (ID P1.2216.0.0)
Parameter settings (example)
Parameters Value Value
Selection of the axis ID data trigger
P0.6000.0.0 1 1 = Axis 1
Selection of the data ID data trigger
P0.6001.0.0 2216 "Setpoint value speed controller" parameter as trigger sig-
nal
Selection of the data instance ID data trigger
P0.6002.0.0 0 Instance 0
Selection of the array ID data trigger
P0.6003.0.0 0 Array ID = 0
Selection of the trigger event configuration
P0.6004.0.0 1 1 = Rising edge
(exceeding the threshold value in a positive direction)
Selection of trigger threshold
P0.60012.0.0 0.5 Threshold value = 0.5 user units
Tab. 435 Parameter settings (example)
Parameters for configuring the trigger event for diagnostic triggers
ID Px. Parameters Description
Specifies the axis ID of the diagnostic event.
Access read/write
Update effective immediately
103100 Axis ID diagnostic
trace
Unit −
Diagnostics and fault clearance
504 Festo — CMMT-ST-SW — 2019-02