Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 144 / 616

ID Px. Parameters Description
adapted to the inertia of the holding brake by parameters. The
position controller is switched off after expiration of the switch-
off delay. The holding brake should then be completely closed.
Access read/−
Update effective immediately
7166 Current switch-off
delay holding brake
Unit s
Specifies the order code of the motor -> product labelling of the
motor.
Access read/−
Update effective immediately
7188 Current NOC code
motor
Unit −
Specifies the nominal motor voltage of the motor -> data sheet
of the motor. An excessive DC link voltage can destroy the
motor!
Access read/−
Update effective immediately
71422 Current nominal
motor voltage
Unit V
Specifies the effective current that the motor requires to apply
the stall torque -> data sheet of the motor.
Access read/−
Update effective immediately
71425 Current continuous
current
Unit Arms
Specifies the currently used inductance orthogonal to the direc-
tion of the field. This value is a theoretical construct and cannot
be measured. -> data sheet of the motor.
Access read/−
Update effective immediately
71426 Current Lq inductance
Unit H
Specifies the currently used inductance along the direction of
the field. This value is a theoretical construct and cannot be
measured. -> data sheet of the motor.
Access read/−
Update effective immediately
71427 Current Ld inductance
Unit H
Product configuration
144 Festo — CMMT-ST-SW — 2019-02