Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 500 / 616

Parameter settings (example)
Parameters Value Comment
Selection of the axis ID trace data: Axis 1
P0.5501.0.0 1 Channel 0: Axis 1
P0.5501.0.1 1 Channel 1: Axis 1
Selection of the data ID trace data
P0.5502.0.0 4682 Channel 0, current position: following error
P0.5502.0.1 128 Channel 1, actual position value
Selection of the data instance ID trace data
P0.5503.0.0 0 Instance = 0
P0.5503.0.1 0 Instance = 0
Selection of the array ID trace data
5504.0.0 0 ArrayID = 0
5504.0.1 0 ArrayID = 0
Selection of the trace channels
5500.0.0 1 Activate trace channel 0
5500.0.1 1 Activate trace channel 1
Tab. 431 Parameter settings (example)
Trace and trigger configuration parameters
ID Px. Parameters Description
Specifies the trigger type.
This means:
–
0 = after start, immediate recording without trigger
– 1 = Data trigger (parameter as trigger signal)
– 2 = Diagnostic trigger (diagnostic event as trigger signal)
Access read/write
Update effective immediately
341 Trigger type
Unit −
Specifies the status of the measuring data recording.
This means:
–
0 = Recording inactive (idle)
– 1 = Recording active, wait for trigger signal
– 2 = Recording started
556 Data trace status
Access read/−
Diagnostics and fault clearance
500 Festo — CMMT-ST-SW — 2019-02