No.
Name
Function
6
"Stop movement"
Issue stop command.
Tab. 64 Legend for "Manual movement"
"Holding brake"
The status of the holding brake is displayed in this section and the holding brake can be opened or
closed manually. The section is only visible if the device configuration includes a motor with a brake.
The button in this section can be operated if the following requirements are met:
–
The plug-in is connected to a device.
–
Only the master control is set.
"Active closed loop parameter set"
A different closed-loop settings record can be transferred to the active closed-loop parameters in this
section.
The closed-loop settings records are parameterised on the Closed loop panel
è
Overview of the closed-loop settings records.
1 Select closed-loop settings record
2 Transition period during which the closed-
loop settings record should be transferred to
the active closed-loop parameters
3 "Activate closed-loop settings record"
Fig. 29 Manual movements − closed-loop settings record
2.5.3
Record list
All of the records and record links that were created in the "Record list" parameter panel (
è
are listed in the working area.
Records can be started and stopped on this control side. The records cannot be created, edited or
deleted.
Records can be started or stopped if the following prerequisites are met:
–
The plug-in is connected to a device.
–
The plug-in has the master control.
–
Controller enable is activated.
Executing or stopping a record
Records can be executed and stopped via the corresponding button. If a record is being executed, the
symbol Execute record set changes to the symbol Stop record set.
CMMT-ST Plug-in
97
Festo — CMMT-ST-SW — 2019-02
Содержание CMMT-ST-SW
Страница 615: ......
