Festo CMMT-ST-SW, Оригинальное руководство пользователя

Страница: 436 / 616

9.4.2 Structure of messages
All of the messages have the following uniform design:
Key features Brief description
ID (message ID) Unique identification of the diagnostic event consisting of:
–
System (0) or axis label (1,
…
)
– Diagnostic number displayed as followed:
–
Ungrouped (total number)
– Grouped
è
Grouping and overview of the diagnostic messages
– Instance (identification of the instance to differentiate between similar
parameters of different components, e.g. position capture 1 and position
capture 2).
Name (message
text) Brief description of the diagnostic event
Status The following message statuses are possible:
–
Active (diagnostic event is still active)
– Cancelled (diagnostic event is no longer active)
– Acknowledged (the cancelled message has been acknowledged)
Classification Level:
–
Ignore
– information
– Warning
– Error stop category 0, 1 or 2
Time stamp Time of the occurrence in operating hours
Tab. 423 Structure of messages
Complete list of all diagnostic messages
è 9.4.6 Diagnostic messages with information for fault clearance.
Grouping and overview of the diagnostic messages
The diagnostic messages are grouped according to their cause.
This grouping is visible in the corresponding overview, e. g. in the plug-in.
–
Grouped overview:
D[system or axis identification].[main group | sub-group | error number].[instance]
e. g. "D0.01 | 01 | 00011.0"
– Ungrouped overview:
D[system or axis number].[diagnostic number].[instance]
e. g. "D0.16842763.0"
If the device profile only allows 16 bit, only the unique error number is transferred (e. g. 11).
The diagnostic number of the ungrouped overview is determined from the grouped overview as fol-
lows:
Diagnostics and fault clearance
436 Festo — CMMT-ST-SW — 2019-02