manualshive.com logo in svg

YASKAWA SIEMENS CNC Series, Maintenance Manual, Serviceman Handbook

Share
Download
YASKAWA SIEMENS CNC Series Maintenance Manual, Serviceman Handbook Download Page 61

3.2  Spindle motors

3-3

3.2  Spindle motors

•  The spindle motor must be provided with enough space so that it is cooled effectively by 

its cooling fan.  Especially, there must be a 100 mm or more space between the no-load 
side of the spindle motor and a nearest machine part.  If the spindle motor were not 
cooled enough, a motor overheat protector could operate even if the spindle motor runs 
at the rated load.

•  The bed, foundation or mount on which the spindle motor is installed must be rigid 

enough.  Otherwise the bed could vibrate due to the weight of the motor and the 
dynamic load from the machine.

•  The installation site must be free of excessive dust or iron particles.  As the air forced by 

the built-in cooling fan passes along the motor core, it could be blocked by any accumu-
lated dust in the way.  If the spindle motor were not cooled enough, a motor overheat 
protector could operate even if the spindle motor runs at the rated load.

Summary of Contents for CNC Series






















































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands