YASKAWA SIEMENS CNC Series, Maintenance Manual, Serviceman Handbook

Page: 207 / 373

13.2 Specification of machine data and parameters
13-3
13.2 Specification of machine data and parameters
13.2.1 Structures of machine data and parameters
In 840DI system, machine data (CNC data) and parameters (Drive data) have the following
structures:
• Parameters MD3000-MD8999 for Servo drives and
spindle
drives can also be set from the Oper-
ator panels for drives.
• For correspondence between Pn and Cn, refer to Appendix A "Parameters".
• For how to use Operator for drive and precautions in setting data from the Operator for drive, refer
to Chapter 12. "How to use Digital Operation".
MD numbers Display screen Application Remark
MD0 - 2999
Drive parameters Parameters common
to Servo drives and
spindle
drives. (Data,
such as Load and
Alarm, are included.)
Read-only (No data
can be set.)CNC reads
as necessary.
MD3000 - 5999 Parameters to control
Servo drives Correspond to Pn
numbers.To be set for
each axis.
MD6000 - 8999
Parameters to control
spindle
drives
Correspond to Cn
numbers.To be set for
each axis.
MD9000 - 9999 MD display HMI-related machine
data
MD10000 - 19
□□□
General MD General machine data
for CNC
MD20000 - 28
□□□
Channel MD Channel specific
machine data
MD30000 - 38
□□□
Axis MD Axis-related machine
data for CNC To be set for each axis
and spindle.
MD40000 - 4
□□□□
Setting data Setting data for CNC
MD60000 - 65536 To be added to each
MD screen OEM data for CNC
INFO