YASKAWA SIEMENS CNC Series, Maintenance Manual, Serviceman Handbook

Page: 188 / 373

How to use Digital Operation
12.1.8 Operation on the monitor mode
12-16
„ Monitor display of reference pulse, feedback pulse counter, full-closed
pulse counter
For the monitor display of the reference pulse, feedback pulse, and full-closed pulse
counters, the 32-bit data is displayed with hexadecimal numbers.
Here is the procedure to view.
1. On the axis selection mode, select the axis you want to operate.
2. Press the [DSPL/SET] key to select the monitor mode.
3. Press the [UP] or [DOWN] key to select one from "Un00C", "Un00D", and "Un00E".
4. Press the [DATA/ENTER] key to display the data of the monitor number you just
selected Step 3.
5. Press the [UP] or [DOWN] key to view the upper and lower 16-bit data alternately.
6. By pressing the [UP] and [DOWN] keys all together, you can clear the data on the 32-bit
counter.
7. Press again the [DATA/ENTER] key to return to the monitor number display.
Upper 16-bit data
Lower 16-bit data