YASKAWA SIEMENS CNC Series, Maintenance Manual, Serviceman Handbook

Page: 192 / 373

How to use Digital Operation
12.2.3 Checking the motor type
12-20
12.2.3 Checking the motor type
This display mode is used for maintenance of the motor. When the user constant Fn011 is
set, this mode becomes the motor type checking mode. In addition, when the SERVOPACK
is a special specification item, you can check its specification number.
To check the motor type, use the following procedure.
1. On the axis selection mode, select the axis you want to operate.
2. Press the [DSPL/SET] key and select the auxiliary function execution mode.
3. Select the user constant Fn011. Press the [LEFT] or [RIGHT] key to select the setting
digit.
Press the [UP] or [DOWN] key until the value you want to set is displayed.
4. Press the [DATA/ENTER] key to view the servo motor type and voltage identification
data.
5. Press the [DSPL/SET] key to view the capacity of servo motor.
Servo motor type
Voltage Data Servo motor type
Data Voltage 00 SGMAH
00 100 VAC or 140 VDC 01 SGMPH
01 200 VAC or 280 VDC 02 SGMSH
02 Reserved 03
SGMGH-
□
A (1500 min
-1
)
04
SGMGH-
□
B (1000 min
-1
)
05 SGMDH
06 SGMUH
07
SGMKS
The capacity is the indication multiplied by 10 [W].
The example on the left shows 100 W.
servo motor type
voltage