YASKAWA SIEMENS CNC Series, Maintenance Manual, Serviceman Handbook

Page: 183 / 373

12.1 Basic operation
12-11
„ Procedure for changing the function selection user constant
1. Select the axis you want to change on the axis selection mode.
2. Press the [DSPL/SET] key and select the constant setting mode.
3. Select the user constant number you want to specify.
Press the [LEFT] or [RIGHT] key until the setting digit flashes. Select the value using
the [UP] or [DOWN] key. (In this case, Pn003 is selected.)
4. Press the [DATA/ENTER] key to display the current data of the user constant that you
just selected Step 3.
5. Press the [LEFT] or [RIGHT] key to select the digit number you want to set.
6. Press the [UP] or [DOWN] key to select the "value" of function setting which is defined
by the setting digit number.
To change the data, repeat the Step 5 and Step 6.
7. Press the [DATA/ENTER] key. The data is stored and flashes.
8. Press again the [DATA/ENTER] key to return to the user constant number display.
The one-digit setting of user constant Pn003 is already changed into 1.
The setting digit flashes
The setting digit flashes
The setting digit flashes