Studer Vista 5 M3 Operating Instructions Manual Download

Page: 461 / 564

SESSION CONFIGURATION TOOL

The Studer Vista Digital Mixing Systems may be easily reconfigured using

the optional Session Configuration Tool. Whereas the ability for reconfigu-

ration is a great feature of the Studer Vista, it is important for an operator to

fully understand the Session Configuration Tool and its functions. There is

no safeguard functionality to prevent someone from configuring a console

without e.g. the summing buses – and in such a case, the console may not

function properly.

Functions, features, and appearance of the Session Configuration Tool may

be changed by modifying the software. For this reason the operation of the

tool and its parts as described in this manual may be slightly different from

your version.

Information contained in this chapter has been carefully checked and is

believed to be correct and complete. But as we all know, everybody makes

mistakes, and we are not immune either. If you should detect a mistake, kindly

notify us per email to [email protected]. We will be grateful for

your feedback.

No responsibility is taken for any inaccuracies, errors or omissions, nor is any

liability assumed for any loss or damage resulting either directly or indirectly

from use of the information contained in the manual and any accompanying

documentation.

6.1 Installation

Note

A good level of understanding PC basics is assumed for this installation. You

may need to copy files between various media and create subdirectories. You

will be required to edit a simple .ini file to adjust the environment of your

PC. Please have an instruction manual for your Windows version available,

if necessary.

Environment

The Session Configuration Tool will run under Microsoft Windows 2000,

Windows XP, Windows Vista or Windows 7 environments.

Minimum Requirements

The Session Configuration Tool requires the following minimum environment

to run properly:

•

Windows 2000/SP4 or Windows XP/SP2

•

Intel Pentium processor (x86 compatible), 1 GHz or faster

•

512 MB RAM, 2 GB available harddisk space

Vista 5 M3 Digital Mixing System

Session Configuration 6-3

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands