manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 393 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 393

Vista 5 M3 Digital Mixing System

AutoTouchPlus  5-97

Document generated: 28.08.13

SW V4.9

5.14.1.3 

Loading Protection Sets

 

  To make a Protection Set the current set, it must be Loaded unless it was the 

last set used or saved. 

 

  Using the following procedure, previously created Protection Sets may be 

loaded:

1.

  Click the ‘Mix Protection Enabled’ button to open the ‘Automation Pro-

tection’ window if it is not already open.

2.

  Click the ‘Load…’ button and a selection box containing the available 

Protection Sets will be displayed. The current Protection Set will be 

displayed at the bottom of the box in the ‘Current Protection Set:’ field. 

The current set will also be shown in blue in the Protection Set list. All 

others will be in black.

  

3.

  Double-click the desired Protection Set or click it and ‘Load’. The se-

lected set will become the current set and the selection box will close.

 

Note 

Protection Sets cannot be loaded from other Titles. Protection Sets made 

within a Title are only available to that Title. Protection Sets made within a 

Title are available to all Mix Passes within that Title.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments