Studer Vista 5 M3 Page 248 Operating Instructions Manual Download

Page: 248 / 564

Vista 5 M3 Digital Mixing System

4-104 GC Operation

Document generated: 28.08.13

SW V4.9

Notes:

When a cnfiguration is loaded via the Load Configuration menu, the currently

open Title will be closed; no new Title will be opened. Before any data can be

saved using the newly loaded configuration, an existing Title must be opened

or a new one must be created.

If a DSP configuration is displayed in red this means that this configuration

has not been compiled properly by the Session Configuration Tool. Either

run the tool again or delete this configuration.

4.6.1.6

Exit Vista Application

There are three possible ways of quitting the Vista Software application. It is

recommended to use the File menu’s

Exit

item.

Exit GC

This action will close the graphical controller (Vista system application) while

simultaneously muting all monitoring outputs, and returning to the Windows

NT operating system. All other programs and applications continue to run.

Exit System

This action will close the graphical controller (Vista system application) while

simultaneously muting all monitoring outputs. It also quits all other running

applications and the Windows operating system. The controller PC will then

be ready to be switched off.

In case the standard UPS (Un-interruptible Power Supply) is installed, and

the associated PowerChute utility is configured to do so, this will also turn

off the UPS/PC combination automatically after a pre-set time period.

Using Main Window Control

It is also possible to quit the Vista application by clicking on main window

control. There is no confirm box in this case, and the appli cation is terminated

immediately.

It could be potentially dangerous for your session if you click on main

window control, because the application will be terminat ed, and audio will

no longer pass. However, the data that was in use will be written to the ‘last

known session’ and ‘shutdown’ files and will not be lost.

Note:

It is possible for an expert to adjust settings in order to make the close box

disappear.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands