manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 330 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 330

Vista 5 M3 Digital Mixing System

5-34  AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.5.3 

Loading an Existing Mix

 

 

Existing Mix Trees and Mix Passes made with software V3.0 or later may be 

loaded by selecting the following from the Automation menu:

 

  • 

Open Mix Tree…

: Loads an entire Mix Tree. A directory of existing Mix 

Trees within the current Title will be displayed.

  

 

    Double-clicking the desired Mix Tree (or selecting it and clicking Open) 

will load that tree. The last used Mix Pass will be loaded in the top position 

of the Mix Pass Stack and becomes the Active Mix.

  

 

  • 

Load Mix…

: Loads a single Mix Pass into the current Mix Tree. A direc-

tory of existing Mix Trees within the current Title will be displayed.

  

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments