Studer Vista 5 M3 Page 438 Operating Instructions Manual Download

Page: 438 / 564

Vista 5 M3 Digital Mixing System

5-142 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

Vistonics Indicators

The meaning of the different Vistonics indicators is as follows:

Displayed Value

The

displayed value

(e.g. ‘–7.6 dB’) is always the current value, except when

the control is in TRIM mode. Then it shows the offset from TRIM null point.

It is underlined whenever the control is touched (‘hold’ in automation).

Rotary Value

Current and replay value

of the rotary control. If the current value is different

from the one within the last mix pass, a pink-colored element indicates the

value of the last mix pass, while the main display is indicating the current

value.

Fader Value

Current and replay value

of the fader. If the current value is different from

the one in the last mix pass, a pink colored element indicates the value within

the last mix pass, while the main display is indicating the current value.

Recording

Recording and recording mode indicator:

This always refers to the associated

control.

Characters without a frame indicate the status of the rotary control (

= Isolate,

= Read,

= Trim,

= Write).

A red frame behind the

indicates that the rotary control is currently

recording.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands