Studer Vista 5 M3 Page 372 Operating Instructions Manual Download

Page: 372 / 564

Vista 5 M3 Digital Mixing System

5-76 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

Hot Keys

Hot Keys are provided to aid in the entry of glide times. A complete descrip-

tion of Hot Key functions is provided in

chapter 5.24

<Option>

Glide can be applied to all transition points used within the system. The af-

fected points are selected by checking the options in the Glide Options page

(also refer to

chapter 5.22.3

• <Write To:> Glide will be applied to the following

Write To:

transition

points:

- <Punch Out>

- <Next Change>

- <End>

- <Write Zone End (Auto Punch Out)>

• <Extend Back To:> Glide will be applied to the following

Extend Back

To:

transition points:

- <Begin>

- <PUNCH-IN>

• <Back Time Glide (End and Write Zone End Only)>: Glide will ‘back time’

from the transition point. The Glide will start before the transition point

by the amount of the Glide Time. The Glide will finish at the transition

point. This feature does not apply to

Extend Back To:

transition points.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands