Studer Vista 5 M3 Page 177 Operating Instructions Manual Download

Page: 177 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-33

Document generated: 28.08.13

SW V4.9

frame is connected to the console via a serial link. However, when recalling

a snapshot containing the ‘non intelligent’ fixed labels (e.g. from older pro-

ductions), this will overwrite the fixed labels as well and make the ‘intelligent

fixed labels’ disappear. In this case, select

Regenerate Intelligent Fixed

Labels

within the SysAdmin menu and update this snapshot.

4.4.3

Channel Patch

The Channel Patch page of the graphical controller can be called up in three

different ways:

• From the Page menu, by clicking on the appropriate menu item;

• Using the page icons, by clicking on the appropriate icon in the toolbar;

• Using the

CHAN PATCH

function key on the control surface – which is

probably the fastest way.

To quickly switch back from General Patch to Channel Patch page, just click

the right touch pad button while the cursor is positioned over the X-Y field

in the General Patch.

As its name implies, the Channel Patch is channel-oriented, which means that

only

one

channel is displayed at a time.

To select a channel to be displayed in the Channel Patch page:

• Press the

LINK/SEL

key on the desired Desk Channel Strip, or

• Use the Channel Selector in the Toolbar (refer to

chapter 4.2.1

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands