Studer Vista 5 M3 Operating Instructions Manual Download Page 257

Page: 257 / 564

Vista 5 M3 Digital Mixing System

GC Operation 4-113

Document generated: 28.08.13

SW V4.9

The Triggers have to be set according to the application of the selected relay.

All Triggers always work in a logical AND fashion:

• The desired Source must be patched to the appropriate Channel (implicitly

understood and done in the Patch), and

There is the possibility to check up to five other Triggers to finally trigger the

relay:

• User key 1,

and

• User key 2,

and

• Input Selector,

and

• Channel On (MUTE),

and

• Fader open.

Any combination of the five possibilities above can be used. It is also possible

to select from a default list of pre-configured Trigger combinations:

• Fader start,

• User Defined.

Typical fader start setup for two stereo sources (D1 and D2):

Fader Start

Trigger Defaults

The typical Fader Start Trigger combination is:

• Input selector,

and

• Channel on (MUTE),

and

• Fader (open).

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Studer Vista 5 M3, Operating Instructions Manual, Page: 257 / 564

Search results

Summary of Contents for Vista 5 M3

Reviews: