Studer Vista 5 M3 Page 327 Operating Instructions Manual Download

Page: 327 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-31

Document generated: 28.08.13

SW V4.9

5.5.1.4

Mix Tree Click Functions

A variety of ‘click functions’ are available within the Mix Tree. These

functions range from

Left-Click Functions

• Single-clicking a Mix Pass within the Mix Tree will ‘mark’ that pass by

highlighting it in red. Clicking a marked pass will ‘unmark’ it and re-

move the red highlight. Only one mix at a time may be selected using this

method.

• Control-clicking (holding the

Ctrl

key and single-clicking) allows individ-

ual Mix Passes anywhere within the Mix Tree to be marked or unmarked.

Any combination of passes may be marked.

• Shift-clicking (holding the

Shift

key and single-clicking) two Mix Passes

allows these passes and those in-between to be marked or unmarked. The

passes must be within the same branch or root-branch of the Mix Tree.

In this way, multiple passes may be marked. More importantly, the link

history of these passes is maintained.

• Double-clicking a Mix Pass adds it to the top of the Mix Pass Stack and

makes it the Active Pass. The Active Pass will be highlighted in green in

the Mix Tree.

Right-Click Functions

• Right-clicking within the Mix Tree will open the

Mix Tree

Menu. Only

the items that do not pertain to individual passes or branches are shown.

• Right-clicking a Mix Pass within the Mix Tree will open the

Mix Tree

Menu with all available items shown.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands