Studer Vista 5 M3 Operating Instructions Manual Download Page 560

Page: 560 / 564

SCore Live

26 SCore Live

Document generated: 20.09.13

For suppling power to the fans and for fan status monitoring, two connectors

are provided – one at the front, the second at the rear of the unit. They are

connected in parallel, so either one can be used depending on the applica-

tion. If any of the fans should have a short or open circuit, the alarm signal

is triggered.

A 15-pin D-type cable (order no. C089.201167) for connection to the primary

PSU is required.

Please note that currently the fan monitoring is implemented for the use of

the fan unit within the SCore Live only.

For more information on cooling as well as guidelines for power dissipation

estimation refer to

chapter 1.2.2

, paragraph ‘thermal considerations’.

FAN/STATUS

Connector

(15-pin D-type, male, UNC 4-40 thread)

Solder/Crimp View

(or Socket View)

Pin Signal

+VCC (fan supply, +15...24 V)

GND

n.c.

GND

reserved (NTC)

n.c.

Alarm relay + (open collector,

pulling up to VCC if alarm triggered)

GND

n.c.

GND

reserved (Alarm LED+)

n.c.

Replacement Fan:

Order no. C072.010117

3.8 d21m I/O Subsystem

The D21m I/O system consists of several different analog and digital I/O

cards, general-purpose I/O cards, and cards for serial control.

For more information on the D21m system please refer to the ‘D21m I/O

System Operating Instructions’ document available from www.studer.ch in

the ‘Downloads’ - ‘User Guides’ - ‘Studer D21m I/O System’ area.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Brands by name

Popular brands