Studer Vista 5 M3 Page 206 Operating Instructions Manual Download

Page: 206 / 564

Vista 5 M3 Digital Mixing System

4-62 GC Operation

Document generated: 28.08.13

SW V4.9

4.4.5.2.6

XFade Active

It may be useful to temporarily disable cue cross-fades (e.g., during rehear-

sals). This can be done by un-checking this item.

4.4.5.2.7

Preview

The snapshot/cue preview mode can be activated either by a hardware key or

by clicking on the button located in the top right corner of the cue list window.

When in preview mode, the cue or snapshot currently selected (single click)

is compared to the current audio settings. If there is a difference, Vistonics

shows both values at the same time, using a pink graphical indication. When

pressing the dedicated snapshot keys above the touch pad, the preview mode

is automatically activated until the same key is pressed again.

4.4.5.2.8

MIDI Show Control Device

It is possible to control the cue list by using ‘MIDI Show Control’ commands.

Vista 8 acts as a slave in this case. The following ‘MIDI Show Control’ com-

mands are supported: Go, Stop, Resume, Load, Reset, , Standby–,

S, Sequence–.

Vista is designated as a Music Command Format (0x11). The MIDI device

ID is set in the ‘Option: snapshot Automation’ menu.

Examples

Next Cue:

F0 7F [Device ID] 02 11 01 F7

(Go command)

Previous Cue:

F0 7F [Device ID] 02 11 12 F7

(Standby Command), then

F0 7F [Device ID] 02 11 01 F7

(Go Command)

Recall Cue 3.5:

F0 7F [Device ID] 02 11 01 33 2E 35 F7

(Go Command with Q specified)

4.4.5.2.9

MIDI Port Deactivation

CUT

MIDI IN

Update

VCA/Mute

CUT

MIDI OUT

Update

Snapshot

Toggle

Blackout

For enabling or disabling (cutting) the MIDI control input and output ports,

two of the

OPTION

desk keys can be used

The MIDI In and Out ports can be disabled, (together with the blackout func-

tion as well as the hardware

NEXT

and

PREVIOUS

keys on the console

surface) using the

ARM CUELIST

button in the theatre cue list. Different

options can be set in the

Option - Snapshot Automation

menu.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands