Studer Vista 5 M3 Page 371 Operating Instructions Manual Download

Page: 371 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-75

Document generated: 28.08.13

SW V4.9

• Glide Before Transition Point (Back Time enabled

<Option>

): This feature

is only available for

Write To:

data transitions and at the end of the Write

Zone when AutoPunch is used.

Write To:

At the Record Data-to-Read Mix Data transition,

Glide

functions will start before the transition point by the amount of the

Glide Time. The Glide will continue until the Read Mix Data values

have been restored (at the specified transition point). The Glide op-

eration will be completed by the Next Change or End location. For

example, if a three second Glide is applied with ‘back time’ enabled,

the control will start gliding back to its Read Mix data three seconds

before its

Write To:

transition point.

Setting the Glide Time

The Glide Time period of time it takes for controls to glide from their Re-

cord values to their Read Mix values. This time can be any value between

00:00:00.00 and 23:59:59.2x and is specified via the Glide Time entry field

in the AutoTouchPlus window on the GC. Glide times can be typed in or

entered using the click-and-scroll method.

Right-clicking the Glide Time entry field will open the Entry Field Right-

click menu. This menu contains several items that assist the user in quickly

entering timecode values.

• Significant System Times:

Mix Begin

Mix End

Current Time

Clear

(00:00:00.00)

, and

End of Day (23:59:59.23)

• Cue List Times: Allows access to the Title Cue List and provides the means

to sort and go to cues

•

Copy/Paste/Undo Changes

: Entry field clipboard functions

•

Most Recent

: A list of the most recently used timecode locations is main-

tained by the system. Timecode locations from this list many be selected

for the entry field value. The most recent timecode (current value) may

be locked as the entry field value, to prevent it from being changed. A

timecode may be manually added to the list. The list may be sorted and

deleted.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands