manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual, Page: 329 / 564

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 329

Vista 5 M3 Digital Mixing System

AutoTouchPlus  5-33

Document generated: 28.08.13

SW V4.9

5.5.2 

Creating a New Mix

 

New Mixes 

To create a new Mix use the following procedure:

  

1. 

Select 

New Mix Tree…

 from the 

Automation

 menu in the GC.

  

 

 The 

New Mix Tree

 box will open and a display of existing Mixes will be 

shown.

  

  

2.

  Enter a name for the Mix in the 

New Mix Tree Name:

 entry field. 

Please 

note that the selected directory is given by the opened Project and Title 

and cannot be edited.

  

3.

  Click the 

New Mix Tree

 button. A new Mix folder, Mix Tree file, and first 

Mix Pass file will be created in the Title folder.

 

  A new Mix Tree will appear on the screen underneath the AutoTouchPlus 

window. A Mix Pass (#1) will be at the start of the tree and will be the Active 

Pass in the Mix Pass Stack.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments