Studer Vista 5 M3 Page 133 Operating Instructions Manual Download

Page: 133 / 564

Vista 5 M3 Digital Mixing System

Parameters 3-45

Document generated: 28.08.13

SW V4.9

CENTER On/Off

On/off selector for center channel use.

CENTER

Center channel percentage control; 0% = no center channel use (phantom

center), 100% = center channel fully active.

FRONT WIDTH On/Off

Switches the FRONT WIDTH function on/off.

FRONT WIDTH

The FRONT WIDTH parameter is used to control the width of the front signal.

It is only functional if there is a difference between the left and right input

channels. FRONT WIDTH operates over a range from 0% (mono) to 200%

(‘super stereo’).

F/R DEPTH On/Off

Switches the F/R DEPTH function on/off.

F/R DEPTH

The F/R DEPTH parameter is used to control the depth of the surround space.

It is only functional if there is a difference between the front and the rear input

channels. F/R DEPTH operates over a range from 0% (zero depth) to 200%

(‘super depth’).

REAR WIDTH On/Off

Switches the REAR WIDTH function on/off.

REAR WIDTH

The REAR WIDTH parameter is used to control the width of the rear signal.

It is only functional if there is a difference between the left and right input

channels. REAR WIDTH operates over a range from 0% (mono) to 200%

(‘super stereo’).

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands