Studer Vista 5 M3 Page 250 Operating Instructions Manual Download

Page: 250 / 564

Vista 5 M3 Digital Mixing System

4-106 GC Operation

Document generated: 28.08.13

SW V4.9

4.6.4

The Option Menu

The Option menu

is used to set up various operating modes, prefer ences, and

options. It consists of several items, some of which may not be available if the

appropriate Vista option is

not

installed. Items in the upper part will generally

bring up a screen for selection of settings and operating modes; the lower part

contains items that can be directly checked from the menu.

4.6.4.1

Option: Meter / Generator

The Meter/Generator page is used for adjusting various settings of the desk

channel strip metering and test generator. Generator defaults are automati-

cally saved in the

D950system\shutdown.pfc

file when quitting the system,

so that the

last used

defaults are available after the next start of your system.

Metering / Meter Position

This action globally sets the metering signal source for all the channels of

the same type to the same point within the signal path. It is usual to set the

Input Channel and Monitor Channel meter sources to Input and those of the

Group, AUX and Master Channels to the Post-Fader position. However,

meter positions may be changed on a channel-by-channel basis and saved

with snapshots and presets.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands