Studer Vista 5 M3 Page 140 Operating Instructions Manual Download

Page: 140 / 564

Vista 5 M3 Digital Mixing System

3-52 Parameters

Document generated: 28.08.13

SW V4.9

Response Time

The response can be set from 20 ms up to 4 s. Recommended setting is 50 ms

but the engineer’s ears have to decide. The response time cannot be compared

with release and attack times of dynamic processes. This time sets how fast

the crossfades between the calculated gain values are executed and how fast

VistaMix is reacting on the occurring changes of the signals.

Pan Mode

The pan mode parameter defines where the PAN values of the individual

contributing channels are calculated. This applies for stereo VistaMix master

channels only (on mono VistaMix masters this parameter is automatically

blanked).

Normally dialogue is kept pretty central or even mono, so this is not an issue.

If however significant panning of the source channels is applied, then moving

the source channel pan function may change the acoustic effect of VistaMix

operation. Depending on the amounts of panning, there is a compromise

between dialogue moving and background noise and spill changing.

Initial settings from the comparison table below are recommended. But some

own experimenting will do no harm, and the final decision is up to the engi-

neer’s ears.

Pan Mode

Pro

Con

Panning Level

Dependency

Recommended:

POST

Stable

Speakers

Moving

Ambience

Better for lower

Pan values

Quiet environments and/

or low pan values (Studio)

PRE

Stable

Ambience

Moving

Speakers

Better for higher

Pan values

Loud environments and/or

high pan values (Field)

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands