Studer Vista 5 M3 Page 331 Operating Instructions Manual Download

Page: 331 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-35

Document generated: 28.08.13

SW V4.9

Double-clicking the desired Mix Tree folder will open that tree and the

Mix Passes within will be displayed. The desired Mix Pass may be loaded

by double-clicking its name or icon. The newly loaded Mix Pass will be

loaded in the top position of the Mix Pass Stack and becomes the Active

Mix. Mixes may also be loaded from other Titles.

Use the Import function (menu

File – Import – Mix

), select the Mix Pass

in the desired Project/Title/Mix Tree, and click Open.

Now you can select the Project/Title/Mix Tree folder to save the selected

Mix Pass. It is even possible to rename the Mix Pass if required.

Use the Load Mix function to load the Mix Pass into the current Mix Tree.

Notes

Whenever a single Mix Pass is loaded, it starts a new branch at the start of

the Mix Tree.

The Mix Pass Stack is not maintained after the Mix Tree is closed. However,

the last Active Mix Pass is loaded at the top of the Mix Pass Stack when an

existing Mix Tree is opened.

5.6 Mix Pass

A Mix Pass contains a set of records for each dynamic control, fader Trim

Replay Data if any, and a set of values for static controls.

Creating a Mix Pass

A new Mix Pass is created whenever any of the following occur:

• A change in a dynamic control is recorded (such as using

TOUCH – Re-

cord

or Global Punch-in/Out);

•

Make/Save Pass

is selected from the GC Automation menu;

• An offline edit is performed with either OFLA or the Event Editor

In all cases above, the new Mix Pass is added to the Mix Tree and to the top

of the Mix Pass Stack. It also becomes the Active Mix Pass.

As part of the Mix Tree, each new Mix Pass is stored to the hard drive. Because

of this, every Mix Pass created is retained by the system unless purposely

deleted. Refer to

chapter 5.5

, File Management.

Notes

Mix Tree folders or Mix Passes need to be deleted in the Windows Explorer.

Making changes to Static controls or using Audition modes will not generate

a new Mix Pass.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands