manualshive.com logo in svg

Studer Vista 5 M3, Operating Instructions Manual

Share
Download
Studer Vista 5 M3 Operating Instructions Manual Download Page 61

Vista 5 M3 Digital Mixing System

Desk Operation  2-21

2.6.9 

Control and Mute Groups

2.6.9.1 

Control Group Setup

 

  

SETUP: GROUPS 

 

  Pressing this key will enter/exit control group 

and 

mute group mode. 

 

  After having entered 

SETUP: GROUPS

, the user selects the control group 

he wants to edit by pressing 

LINK / SEL

 on the corresponding control group 

master channel. Then the desired channels are added to or removed from the 

control group by pressing their 

LINK / SEL

 key. The 7-segment display next 

to the channel fader indicates the control group number.

  

The control group assignment is saved within each snapshot, therefore the 

assignment may change from snapshot to snapshot.

  

The 

MULTISEL

 key is active as standard, thus allowing to select and de-select 

individual channels. Clearing the entire definition of a control group is easily 

done by pressing the 

MULTI SEL

 key, so that it gets dark. After that, any press 

on 

LINK / SEL

 

of any channel will clear all others. It is also possible to add 

multiple channels to a control group: Press and hold one 

LINK / SEL

 

key and 

press another one on a different channel. All channels in between will be 

added to the control group.

2.6.9.2 

Mute Groups

 

  

Vista 5 M3 provides up to 16 mute groups. 

MUTE GROUPS M1...M8

 have 

dedicated keys on the left side of the control bay. 

 

  Mute groups M9...M16 may be operated using eight of the 16 monitoring 

source selectors. Use of these keys (monitoring source selectors 

or

 mute 

groups) is defined in the ‘Option: Vista Settings’ menu, as shown below. 

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands