Studer Vista 5 M3 Page 419 Operating Instructions Manual Download

Page: 419 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-123

Document generated: 28.08.13

SW V4.9

+/– Box

Toggles the Offset Value between positive (+) and negative (–); ‘+’ is the

default value

Offset Value

Difference between the Active Mix and Spread Source Mix In Times

(00:00:00:00 is the default value)

Offset Lock

Freezes the Offset value

The relationships between the Active Mix and Spread Source Mix In Times

and the Offset Values are as follows:

• If the Active Mix and Spread Source Mix In Times are identical, the Offset

Value will be 00:00:00:00

• If the Active Mix In Time is 10 seconds greater than the Spread Source

Mix In Time, the Offset Value will be +00:00:10:00

• If the Active Mix In Time is 10 seconds less than the Spread Source Mix

In Time, the Offset Value will be –00:00:10:00

• Changing either In Time will cause a corresponding change in the Offset

Value unless it is locked

• Locking the Offset field will freeze its value. When locked, its value re

mains constant when changes are made in the other fields. Changing either

In Time will then cause a corresponding change in the other In Time. It is

important to note that the Offset Value may be edited even when it’s locked

Note

It is possible to lock both Length and Offset fields.

5.17.3.3

Merge Mix

The Merge Mix allows mix data from a region of an external mix to be ap-

plied to the Active Mix. The data from the selected region in an external mix

(Merge Mix) is applied to the selected objects, on the selected channels, in

the Active Mix during the Edit Region.

The Merge Mix combo box has two primary control sets:

•

Mix Selection Menu:

used to select the Merge Mix;

•

Timecode Entry Fields:

used to select the source region of the Merge Mix.

In addition, an Offset combo box is provided so the Active Mix and Merge

Mix

In Times

can be easily offset from each other.

Mix Selection Menu

This pop-up menu box provides a list of mixes available to become the Merge

Mix. This list contains the same mixes that are available to the Active Mix

and functions using the same selection techniques.

Note

The Merge Mix may be the same mix as the Active Mix.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands