Studer Vista 5 M3 Operating Instructions Manual Download Page 388

Page: 388 / 564

Vista 5 M3 Digital Mixing System

5-92 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

Record a Menu Item Change

To automate a menu item, use the following procedure:

Select the desired global Control Mode.

Write

will overwrite previous

changes, both location and connection type. Trim will allow the locations

of changes to be moved without changing connection types.

Select

TOUCH – Record

Select the desired

Write To:

function.

Open the appropriate GC menu and select the desired item.

Perform desired operations to be automated.

At the time the desired operation is performed, AutoTouchPlus will

punch-in. The new item state will persist until the

Write To:

conditions

are met or a Global Punch-out occurs. (

trimmed

status will persist until

the Next Change by default.)

Upon punch-out a new Mix Pass will be created.

Note

Like any other object within AutoTouchPlus, menu items are Static objects

until a change state is recorded in the system. Therefore, menu items may be

updated in the same manner as any other Static control.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Studer Vista 5 M3, Operating Instructions Manual, Page: 388 / 564

Search results

Summary of Contents for Vista 5 M3

Reviews: